Adventurer One Gas Specifications

DIMENSIONS
OVERALL LENGTH 104.7 in. (2660 mm)
OVERALL WIDTH 48.9 in. (1243 mm)
OVERALL HEIGHT (without suntop) 47.1 in. (1198 mm)
WHEELBASE 64.4 in. (1637 mm)
FRONT WHEEL TREAD 34.7 in. (883 mm)
REAR WHEEL TREAD 38.6 in. (980 mm)
MINIMUM GROUND CLEARANCE 4.8 in. (123 mm)
ENGINE/DRIVE TRAIN
ENGINE TYPE Yamaha built, low emission single cylinder 60° incline OHV
DISPLACEMENT 357 cm³
BORE x STROKE 85 x 63 mm
HORSEPOWER 11.4 HP (8.5 Kw/3500 rpm)
COMPRESSION RATIO 8.1:1
LUBRICATION SYSTEM Splash style positive oil lubrication
OIL CAPACITY 1 U.S. quart (1 liter, 1000 cc)
AIR CLEANER Two stage, urethane-foam pre-cleaner and high-capacity pleated paper cartridge
COOLING SYSTEM Forced air
CARBURETOR Mikuni BV26-18
IGNITION SYSTEM Transistor magneto ignition
TRANAXLE EnduraDrive™ V-belt automatic forward/reverse transaxle equipped with high-precision helical gears, 11.40:1 drive axle ratio
CHASSIS
FRAME HybriCore™ Chassis features a robotic welded automotive ladder-style steel frame mated to a polypropylene structural floor. Frame is protected with a multi-step full-immersion phosphate treatment, electro-deposition epoxy-based coating, and a electrostatic applied polyester/urethane powder topcoat
BODY Custom-formulated thermoplastic olefin; front is painted with a two-part topcoat of high-luster automotive grade polyurethane
STEERING Self-compensating double reduction helical rack-and-pinion, permanently lubricated with sealed bearings and greaseless tie-rod ends
FRONT SUSPENSION Tru-Trak II™ fully independent automotive-style strut suspension
REAR SUSPENSION Unit swing arm with coil springs over hydraulic shock absorbers
BRAKES Maintenance-free internal transaxle disc brake
SEATING Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and mated to a warp and moisture resistant polypropylene bottom, strengthened with plated steel inserts
BUMPER Front 5 mph energy-absorbing bumper
PERFORMANCE
MAX FORWARD SPEED 15 mph (24 km/h)
MAX REVERSE SPEED 11.4 mph (18.4 km/h)
TURNING RADIUS 9.2 ft (2.8 m)
GENERAL
DRY WEIGHT (less battery) 757 lbs (343 kg)
CARGO BOX MATERIAL Roto-molded linear Polyethylene
CARGO BED CAPACITY 300 lbs (136 kg)
CARGO BED SIZE (LxWxH) 29.3 in. (744 mm)x 46.0 in. (1168.8 mm)x 10.0 in. (245 mm)
CARGO BED LOAD HEIGHT 27.3 in. (695 mm)
FUEL TANK CAPACITY 5.8 US gal (22.0 L)
TIRE SIZE 18.00 x 8.50-8.00 (4-ply rating)
SEATING CAPACITY 2 persons
AVAILABLE PAINT COLORS STANDARD: Tortuga OPTIONAL: Glacier, Garnet, Sandstone Metallic, Cobalt Metallic, Anthracite Metallic, Onyx Metallic
AVAILABLE SEAT COLOR Stone
WARRANTY
WARRANTY Standard 2-year limited vehicle warranty

*Specifications subject to change without notice